Input impedance unbalanced
Listado input impedance unbalanced
-
input impedance unbalanced (nominal) 69k ohms balanced (nominal) 11k ohmsgama dinámica (aes- db método, todas las sensibilidades) no ponderado> 104db ponderada> 107dbimpedancia de entrada (nominal) 69k ohmiosimpedancia de entrada (nominal) 69k ohmios equilibradas (nominales) 11k ohmiosequilibradas (nominales) 11k ohmiosdbv: db por debajo del clip (max): 75 dbsensibilidad de entrada vrms: 1dimensiones (pulgadas) altanchpr 1,73 x x 6,67el rechazo de modo común de 20 hz 20 khz (min)75 db
$ 6455800
-
Especificaciones técnicas line level input: 2 pairs balanced; 4 pairs unbalanced home theater (line level, left, right, sub) input: 1 set balanced; 1 set unbalanced processor loop (line level) input: 1 pair unbalanced input impedance (line level) input: 50k ohms phono input (mm or mc): 1 pair unbalanced main outputs: 1 pair balanced; 1 pair unbalanced (main outputs may be configured as flat or high-pass; high-pass is adjustable from 50 hz to 250 hz) subwoofer (left, right, summed) output: 1 set balanced; 1 set unbalanced (subwoofer outputs may be configured as flat or low-pass; low-pass is adjustable from 50 hz to 250 hz) processor loop (line level) output: 1 pair unbalanced minimum recommended load impedance: 600 ohms trigger input and output: 1 each ir input and output: 1 each gain structure: nominal output level: 0 dbv (1 v) nominal gain (with volume set to ?0?): 1 maximum gain: +12 db high-frequency and low-frequency trims: hf trim (settings): -3 db, -2 db, -1 db, flat, +1 db, +2 db, +3 db @ 12 khz hf trim (inflection point): 4 khz lf trim (settings): -3 db, -2 db, -1 db, flat, +1 db, +2 db, +3 db @ 50 hz lf trim (inflection point): 200 hz bass management: crossover slopes (high-pass and low-pass): 12 db / octave crossover frequency (high-pass and low-pass): user configurable, 50 hz to 250 hz balanced input to balanced output s/n (signal-to-noise ratio, a-weighted, ref +6 dbv): > 117 db frequency response: 20 hz to 20 khz +/- 03 db thd (total harmonic distortion, ref 10 mv):especificaciones técnicas line level input: 2 pairs balanced; 4 pairs unbalanced home theater (line level, left, right, sub) input: 1 set balanced; 1 set unbalanced processor loop (line level) input: 1 pair unbalanced input impedance (line level) input: 50k ohms phono input (mm or mc): 1 pair unbalanced main outputs: 1 pair balanced; 1 pair unbalanced (main outputs may be configured as flat or high-pass; high-pass is adjustable from 50 hz to 250 hz) subwoofer (left, right, summed) output: 1 set balanced; 1 set unbalanced (subwoofer outputs may be configured as flat or low-pass; low-pass is adjustable from 50 hz to 250 hz) processor loop (line level) output: 1 pair unbalanced minimum recommended load impedance: 600 ohms trigger input and output: 1 each ir input and output: 1 each gain structure: nominal output level: 0 dbv (1 v) nominal gain (with volume set to ?0?): 1 maximum gain: +12 db high-frequency and low-frequency trims: hf trim (settings): -3 db, -2 db, -1 db, flat, +1 db, +2 db, +3 db @ 12 khz hf trim (inflection point): 4 khz lf trim (settings): -3 db, -2 db, -1 db, flat, +1 db, +2 db, +3 db @ 50 hz lf trim (inflection point): 200 hz bass management: crossover slopes (high-pass and low-pass): 12 db / octave crossover frequency (high-pass and low-pass): user configurable, 50 hz to 250 hz balanced input to balanced output s/n (signal-to-noise ratio, a-weighted, ref +6 dbv): > 117 db frequency response: 20 hz to 20 khz +/- 00 mv): 96 db frequency response (referenced to standard riaa curve): 20 hz to 20 khz +/- 035 db thd (total harmonic distortion, ref 13 db thd (total harmonic distortion, ref 10 mv)02 db thd + n (harmonic distortion plus noise, @ 1 khz): 113 db frequency response: 20 hz to 20 khz +/- db thd + n (harmonic distortion plus noise, @ 1 khz): 114 db frequency response: 20 hz to 20 khz +/- db thd + n (harmonic distortion plus noise, @ 1 khz): 115 db frequency response: 20 hz to 20 khz +/- db thd + n (harmonic distortion plus noise, @ 1 khz): 79 db frequency response (referenced to standard riaa curve): 20 hz to 20 khz +/- 0
$ 2000000
-
1 khz data type - mp3 format (playback) bit rate: kbps, vbr sampling frequency: khz inputs input [1] [2]: xlr (balanced input) / standard phone (unbalanced input) combo jack input impedance: (using balanced input) 3 ko or more, pin 2 hot (using unbalanced input) 470 ko or more input gain: (using balanced input) -16 db to +43 db (using unbalanced input) -30 db to +32 db built-in stereo mic: unidirectional condenser microphone sensitivity: -45 db/1 pa at 1 khz input gain: -16 db to +51 db maximum sound pressure input: 140 db spl external mic: mini stereo phone jack input impedance: 2 ko or more input gain: - 16 db to +51 db outputs line/phone: line output load impedance: 10 ko or more line rated output level: -10 dbu phone: 20 mw + 20 mw (into 32o load) monaural speaker: 400 mw 8 o phantom power: 48v, 24v, off usb: usb 2general number of simultaneous recording tracks: 2 (stereo mode), 4 (4ch mode), 2 (mtr mode) number of simultaneous playback tracks: 2 (stereo mode), 4 (4ch mode), 4 (mtr mode) recording time 4 gb (sdhc): approx1 khz/16-bit without headphones connected about 6 hours using alkaline batteries or about 8 hours using nimh (mah) batteries stamina mode using built-in mics at 44actual times may differ according to recording conditions68 hours (mp khz / 128 kbps stereo track) * recording times are approximations1 khz / 16-bit stereo track) approx1 khz/16-bit without headphones connected about 10 hours using alkaline batteries or about 12 hours using nimh (mah) batteries dimensions: 73 (w) × (d) × 37 (h) mm weight: 294 g * 0 dbm = vrms * design and specifications subject to change without notice380 minutes (wav 440 high speed mass storage class operation, audio interface operation (usb functions can be operated by usb bus power) power requirements: dc 5v 1a ac from ac adapter (zoom ad-14), 2 x aa batteries batteries: iec r6 (size aa) x 2 continuous recording time: stereo mode using built-in mics at 44maximum file size of simultaneous recording: 2 gb projects: /card locate function: hours/minutes/seconds/milliseconds other functions: punch-in/out, bounce, a-b repeat effects modules: 2 stereo / 4ch mode: lo cut, comp/limiter mtr mode: pre amp module, efx module types: 53 patches: 60 tuners: chromatic, guitar, bass, open a/d/e/g, dadgad metronome sound sources: 5 variable beat: , unaccentuated tempo: bpm a/d conversion: 24-bit × 128 oversampling d/a conversion: 24-bit × 128 oversampling recording media: sd card (16 mb – 2 gb), sdhc card (4 gb – 32 gb) display: 128 x 64 dots full-dot backlit lcd data type - wav format (record/play) quantization: -bit sampling frequency: khz data type - mp3 format (recording) bit rate: kbps, vbr sampling frequency: 44
$ 720000
-
input connectors 1/4" trs, female xlr (pin 2 hot) input type electronically balanced/unbalanced, rf filtered input impedance balanced 40k ohm, unbalanced 20k ohm max input >+21dbu balanced or unbalanced cmrr >40db, typically >55db at 1khz output connectors 1/4" trs, male xlr (pin 2 hot) output type impedance-balanced/unbalanced, rf filtered output impedance balanced 100 ohm, unbalanced 50 ohm max output >+21dbu balanced/unbalanced into 2k ohm or greater; >+18dbm balanced/unbalanced (into 600 ohm) bandwidth 20hz to 20khz, +05/-1db frequency response 50khz, +02 kg) shipping weight 65/-3db dynamic range typically >112db signal to noise ratio typically >95db thd+noise <% interchannel crosstalk <-90db, 20hz to 20khz bypass switch bypasses the graphic equalizer section in the signal path low cut switch activates the 50hz 12db/octave high-pass filter range switch selects either +/- 6db or +/-12db slider boost/cut range operating voltage vac hz power consumption 15w power connector iec receptacle unit weight 48kg) dimensions cm) h x cm) d x cm) w
$ 399000
-
5% thd+n) -3 dbu phantom power (±2 vdc) +48 vdc instrument input type ¼" trs female unbalanced input impedance 00 db) 14 hz to 70 khz input impedance (balanced) ω thd+n (unwtd, 1 khz @ +4 dbu output, unity gain) s/n ratio (unity gain, ref5 mω line outputs type ¼" balanced output impedance 51ω headphone output type ¼" trs active stereo maximum output 60 mw/ch @ 60ω load frequency response (±1= +4 dbu, 20 hz to 22 khz) > 95 db common mode rejection ratio (1 khz, 55 db gain) > 45 db gain control range (± 1 db) 0 db to 35 db max input level (unity gain, 1 khz @ 00 db) 20 hz - 30 khz envienos tus inquietudes antes de dar click en comprarespecificaciones técnicas: type xlr female balanced frequency response (±30 db) 20 hz - 30 khz envienos tus inquietudes antes de dar click en comprarespecificaciones técnicas: type xlr female balanced frequency response (±3
$ 1200000
-
7” hf + 1 x 12” lf frequency response(-3db) 50hz-20khz amplifier power output w (rms) amplifier type hf class ab, lf class d maximum spl (1m) 124db/130db (peak) input impedance balanced 20ko, unbalanced 10ko rated impedance 8o dispersion (h x v) 90° x 60° connector 2 x combo input, 2 x xlr output, 1 x xlr mix output power supply ac 220v-240v~, hz (or ac 110v-120v~, hz) dimension(wxhxd) 368mm x 349mm x 630mm packaging dimensions 420mm x 410mm x 710mm net weight 21700 vatios de potencia rms puede dar mas de 130 decibeles! sonido netametne profesional, alta pureza, brillos cristalinos, excelentes bajos5kg gross weight 23construction plastic transducers 1 x 15kgcabina activa de alta potencia, ideal para discotecas, sonido al aire libre, conciertoscabina activa de alta potencia, ideal para discotecas, sonido al aire libre, conciertos
$ 1630000
-
Frequency response 10hz-30khz,+/-3db input impedance (guitar) 10k? input impedance (mic) 10k? output impedance +/-470? max output 2dbv/mv distortion 020% residual noise -108db equivalent 2uv noise level -101dbu input 1 unbalanced input (phone) output 1 balanced output (xlr) output 1 unbalanced output (phone) weight 280g size 112mm×103mm×53mmcaja directa kirlin dfx caja directa pasiva, con carcaza metalicamuy buen desempeño
Bogotá (Bogotá)
-
Frequency response 10hz-30khz,+/-3db input impedance (guitar) 10k? input impedance (mic) 10k? output impedance +/-470? max output 2dbv/mv distortion 020% residual noise -108db equivalent 2uv noise level -101dbu input 1 unbalanced input (phone) output 1 balanced output (xlr) output 1 unbalanced output (phone) weight 280g size 112mm×103mm×53mmtipo: otros caja directa kirlin dfx caja directa pasiva, con carcaza metalicamuy buen desempeño
Bogotá (Bogotá)
-
High output spl and sensitivity 2 x 4” high power transducers 1 x 1” diaphragm compression driver 120º x 120º controlled coverage pattern built-in power amplifier module master volume control 2 x xlr connectors injection molded cabinet design for foh use suitable for use as a main system with or without sub speaker augmentation portable system (stand), or permanent installation (wall, ceiling, under balcony) powder coated grill with foam backing comes with convenient mounting bracket available in black or white cabinet dimension: specifications construction plastic transducers 1 x 1” hf + 2 x 4” lf frequency response (-3db) 100hz-20khz rated power 100w (rms) amplifier type class h maximum spl (1w @ 1m) 118db (peak) input impedance balanced 20kω, unbalanced 10kω rated impedance 4ω dispersion (h x v) 120° x 120° connector 2 x xlr power supply 110v/220v dimensions (w x d x h) 182mm (74lb) installation drawing: garantía: defectos de fabrica * 6 mesas - no parlantehigh output spl and sensitivity 2 x 4” high power transducers 1 x 1” diaphragm compression driver 120º x 120º controlled coverage pattern built-in power amplifier module master volume control 2 x xlr connectors injection molded cabinet design for foh use suitable for use as a main system with or without sub speaker augmentation portable system (stand), or permanent installation (wall, ceiling, under balcony) powder coated grill with foam backing comes with convenient mounting bracket available in black or white cabinet dimension: specifications construction plastic transducers 1 x 1” hf + 2 x 4” lf frequency response (-3db) 100hz-20khz rated power 100w (rms) amplifier type class h maximum spl (1w @ 1m) 118db (peak) input impedance balanced 20kω, unbalanced 10kω rated impedance 4ω dispersion (h x v) 120° x 120° connector 2 x xlr power supply 110v/220v dimensions (w x d x h) 182mm (74lb) installation drawing: garantía: defectos de fabrica * 6 mesas - no parlante8”) net weight (1 piece/pack) 6kg (132lb) gross weight (1 piece/pack) 7kg (156”) packaging dimensions (1 piece/pack) 230mm (9
$ 865200
-
Características: altavoz activo doble parlante de 4", driver en titanio 1" potencia 100w rms, 200w program impedancia de 4 ohm 2 conectores xlr entrada y salida acabado en fibra ___________________________________________________________ high output spl and sensitivity 2 x 4” high power transducers 1 x 1” diaphragm compression driver 120º x 120º controlled coverage pattern built-in power amplifier module master volume control 2 x xlr connectors injection molded cabinet design for foh use suitable for use as a main system with or without sub speaker augmentation portable system (stand), or permanent installation (wall, ceiling, under balcony) powder coated grill with foam backing comes with convenient mounting bracket available in black or white cabinet dimension: specifications construction plastic transducers 1 x 1” hf + 2 x 4” lf frequency response (-3db) 100hz-20khz rated power 100w (rms) amplifier type class h maximum spl (1w @ 1m) 118db (peak) input impedance balanced 20kω, unbalanced 10kω rated impedance 4ω dispersion (h x v) 120° x 120° connector 2 x xlr power supply 110v/220v dimensions (w x d x h) 182mm (74lb) installation drawing:características: altavoz activo doble parlante de 4", driver en titanio 1" potencia 100w rms, 200w program impedancia de 4 ohm 2 conectores xlr entrada y salida acabado en fibra ___________________________________________________________ high output spl and sensitivity 2 x 4” high power transducers 1 x 1” diaphragm compression driver 120º x 120º controlled coverage pattern built-in power amplifier module master volume control 2 x xlr connectors injection molded cabinet design for foh use suitable for use as a main system with or without sub speaker augmentation portable system (stand), or permanent installation (wall, ceiling, under balcony) powder coated grill with foam backing comes with convenient mounting bracket available in black or white cabinet dimension: specifications construction plastic transducers 1 x 1” hf + 2 x 4” lf frequency response (-3db) 100hz-20khz rated power 100w (rms) amplifier type class h maximum spl (1w @ 1m) 118db (peak) input impedance balanced 20kω, unbalanced 10kω rated impedance 4ω dispersion (h x v) 120° x 120° connector 2 x xlr power supply 110v/220v dimensions (w x d x h) 182mm (78”) net weight (1 piece/pack) 6kg (134lb) installation drawing2lb) gross weight (1 piece/pack) 7kg (156”) packaging dimensions (1 piece/pack) 230mm (9
$ 790000
-
Características: altavoz activo doble parlante de 4", driver en titanio 1" potencia 100w rms, 200w program impedancia de 4 ohm 2 conectores xlr entrada y salida acabado en fibra ___________________________________________________________ high output spl and sensitivity 2 x 4” high power transducers 1 x 1” diaphragm compression driver 120º x 120º controlled coverage pattern built-in power amplifier module master volume control 2 x xlr connectors injection molded cabinet design for foh use suitable for use as a main system with or without sub speaker augmentation portable system (stand), or permanent installation (wall, ceiling, under balcony) powder coated grill with foam backing comes with convenient mounting bracket available in black or white cabinet dimension: specifications construction plastic transducers 1 x 1” hf + 2 x 4” lf frequency response (-3db) 100hz-20khz rated power 100w (rms) amplifier type class h maximum spl (1w @ 1m) 118db (peak) input impedance balanced 20ko, unbalanced 10ko rated impedance 4o dispersion (h x v) 120° x 120° connector 2 x xlr power supply 110v/220v dimensions (w x d x h) 182mm (74lb) installation drawing:características: altavoz activo doble parlante de 4", driver en titanio 1" potencia 100w rms, 200w program impedancia de 4 ohm 2 conectores xlr entrada y salida acabado en fibra ___________________________________________________________ high output spl and sensitivity 2 x 4” high power transducers 1 x 1” diaphragm compression driver 120º x 120º controlled coverage pattern built-in power amplifier module master volume control 2 x xlr connectors injection molded cabinet design for foh use suitable for use as a main system with or without sub speaker augmentation portable system (stand), or permanent installation (wall, ceiling, under balcony) powder coated grill with foam backing comes with convenient mounting bracket available in black or white cabinet dimension: specifications construction plastic transducers 1 x 1” hf + 2 x 4” lf frequency response (-3db) 100hz-20khz rated power 100w (rms) amplifier type class h maximum spl (1w @ 1m) 118db (peak) input impedance balanced 20ko, unbalanced 10ko rated impedance 4o dispersion (h x v) 120° x 120° connector 2 x xlr power supply 110v/220v dimensions (w x d x h) 182mm (78”) net weight (1 piece/pack) 6kg (134lb) installation drawing2lb) gross weight (1 piece/pack) 7kg (156”) packaging dimensions (1 piece/pack) 230mm (9
$ 800000
-
Configuration:2-way system type:active studio monitor low-frequency:5" aramid glass composite woofer mid-frequency:n/a high-frequency:1" soft dome tweeter frequency response:45hz - 35khz max peak spl:106 db amplifier class:class a-b power output:50w high frequency:20w mid-frequency:n/a low frequency:30w input impedance (ohms):10 k ohm balanced hf level adjust:-2db, -1db, 0, +1db system volume:(-30db - +6db) indicators:power input connectors: unbalanced rca balanced 1/4" trs balanced xlr enclosure construction:mdf finish:black vinyl wrap port configuration:front firing slot port dimensions (d x w x h):mm) x mm) x mm) weight:14krk rokit generación 3 monitores siguen en esta filosofía de diseño, por lo que independientemente de su estilo, género, o las necesidades particulares de mezclas musicales, krk rokits entreganakita music distribuidor autorizado de krk y mercadolider ofrece para ustedes para entrega o despacho inmediato: monitores de estudio krk rokit 5 3g (par) entrega inmediata vienen las dos unidades en el paquete en akita music manejamos facturacion legal con iva y garantia directa / envios a nivel nacionalkrk systems es uno de los más respetados fabricantes del mundo de los monitores de estudioen su estado de la instalación de arte de diseño, ingenieros krk crean productos que ofrecen respuesta espectral natural y equilibrada con baja distorsión y una imagen superiorlos monitores krk estudio han sido la elección del profesional de ingenieros de grabación y artistas para la mezcla y masterización de discos de éxito en todo el mundo, ya que tienen que escuchar todos los matices del audio que se reproduce4 kg) por lo general llega en 1 o 2 dias habiles pero puede tardar hasta 5 dias habiles dependiendo del lugar de despacho y la disponibilidad en bodegasen akita music manejamos facturacion legal con iva y garantia directa / envios a nivel nacional
$ 1242000
-
Configuration:2-way system type:active studio monitor low-frequency:5" aramid glass composite woofer mid-frequency:n/a high-frequency:1" soft dome tweeter frequency response:45hz - 35khz max peak spl:106 db amplifier class:class a-b power output:50w high frequency:20w mid-frequency:n/a low frequency:30w input impedance (ohms):10 k ohm balanced hf level adjust:-2db, -1db, 0, +1db system volume:(-30db - +6db) indicators:power input connectors: unbalanced rca balanced 1/4" trs balanced xlr enclosure construction:mdf finish:black vinyl wrap port configuration:front firing slot port dimensions (d x w x h):mm) x mm) x mm) weight:14krk rokit generación 3 monitores siguen en esta filosofía de diseño, por lo que independientemente de su estilo, género, o las necesidades particulares de mezclas musicales, krk rokits entregankrk systems es uno de los más respetados fabricantes del mundo de los monitores de estudioen su estado de la instalación de arte de diseño, ingenieros krk crean productos que ofrecen respuesta espectral natural y equilibrada con baja distorsión y una imagen superiorlos monitores krk estudio han sido la elección del profesional de ingenieros de grabación y artistas para la mezcla y masterización de discos de éxito en todo el mundo, ya que tienen que escuchar todos los matices del audio que se reproduce4 kg) por lo general llega en 1 o 2 dias habiles pero puede tardar hasta 5 dias habiles dependiendo del lugar de despacho y la disponibilidad en bodegasakita music distribuidor autorizado de krk y mercadolider ofrece para ustedes para entrega o despacho inmediato: monitores de estudio krk rokit 5 3g white (unidad) viene una unidad en el paquete en akita music manejamos facturacion legal con iva y garantia directa / envios a nivel nacionalen akita music manejamos facturacion legal con iva y garantia directa / envios a nivel nacional
$ 621000
-
0 db input impedance: 10 db input gain (pad on): -8 to 355v supported backup recording: -12db lower than set l/r input gain inputs 1/2: connectors: xlr / trs combo jacks (xlr: pin 2 hot / trs: tip hot) input gain (pad off): -8 to 55specs general recording media: sd card: 16mb to 2gb, sdhc card: 4gb to 32gb display: backlit lcd (128 x 64 pixels) inputs inputs l/r [xyh-5 x/y mic]: mic type: unidirectional sensitivity: -45 db, 1 khz at 1 pa input gain: -8 to 52 db max sound pressure input: 140 db spl mic/line in: connector: 1/8" stereo mini jack input gain: - 8 to 52 db input impedance: 2 k o or more plug-in power: 21khz bit rate: kbps multitrack mode: wav (bwf-compliant) sampling frequency: khz bit rate: (mono/stereo) maximum simultaneous recording tracks: 6 (l/r + input 1/2 + l/r backup) usb mass storage class operation: class: usb 20 full speed sampling frequency: khz bit rate: 16 bit inputs / outputs: 2 / 2 usb bus powered operation possible (ipad operation supported in stereo mode only) power requirements aa size (lr6) battery x 2 ac adapter: ad-17 (dc5v/1a/usb-type) (optional) usb bus powerspecs general recording media: sd card: 16mb to 2gb, sdhc card: 4gb to 32gb display: backlit lcd (128 x 64 pixels) inputs inputs l/r [xyh-5 x/y mic]: mic type: unidirectional sensitivity: -45 db, 1 khz at 1 pa input gain: -8 to 52 db max sound pressure input: 140 db spl mic/line in: connector: 1/8" stereo mini jack input gain: - 8 to 52 db input impedance: 2 k o or more plug-in power: 28 k o or more max input level: +22 dbu (pad on) phantom power: +12v /+24v /+48v equivalent input noise (ein): -120 dbu or less outputs line out: connector: 1/8" stereo mini jack rated output level: -10 dbm output load impedance: 10k o or more phone out: connector: 1/8" stereo mini jack output level: 20 w +20 w into 32 o load built-in speaker: 400mw 8 o mono recording formats stereo mode: wav (bwf-compliant) sampling frequency: khz bit rate: (stereo) maximum simultaneous recording tracks: 2 mp3 sampling frequency: 440 high speed sampling frequency: khz bit rate: bit inputs / outputs: 4 / 2 audio interface operation: stereo mode: class: usb 20 full speed sampling frequency: khz bit rate: 16 bit inputs / outputs: 2 / 2 usb bus powered operation possible (ipad operation supported in stereo mode only) power requirements aa size (lr6) battery x 2 ac adapter: ad-17 (dc5v/1a/usb-type) (optional) usb bus power0 high speed audio interface operation: multitrack mode: class: usb 2
$ 889000
-
input level: +4 dbinput power: v switchable5mm aux cd/mp3 input jack - frequency response: 20hz - 20khz >0input level: +4db - signal/noise ratio: 102db - cooling fan: two-speed dc fan - file compatibility: mp3/wmatwo channels a/b - bridgeable - input impedance: balance 20khz - 2x5 led indicator red,ddt / clipping- yellow, signal- green,powerch b and bridge; binding post; two channels a/b - bridgeable - input impedance: balance 20khz - 2x5 led indicator redtotal power: watt - overload and protection indicator - digital lcd display - double-decoder mp3 function; input level: +4db - signal/noise ratio: 102db - cooling fan: two-speed dc fan - file compatibility: mp3/wma; sd memory card & usb flash drive readers - distortion: 1ddt / clipping; yellowdimensions (w x d x h): 190% - inputs: electronic balanced; barrier strip5db - speaker terminal: speakons for ch a0% - inputs: electronic balanced- barrier strip,xlr,trs volt switchablecooling fan: 2-speed dc5db - speaker terminal: speakons for ch a, ch b and bridge- binding postsd memory card & usb flash drive readers - distortion: 1impedance: 20 kî©{ distortion: 1box dimensions (wxhxd): 13total power: watt - overload and protection indicator - digital lcd display - double-decoder mp3 functiontrs volt switchable; 0signal to noise ratio: 102 dbtotal output power: wpower }total power: watt - overload and protection indicator - digital lcd display - double-decoder mp3 functionfrequency response: 20 hz to 20 khz >â±0compatibility: file: mp3/wmainput: electronic balanced; barrier stripdisplay: digital lcd
$ 3186200
-
0 db input impedance: 10 db input gain (pad on): -8 to 355v supported backup recording: -12db lower than set l/r input gain inputs 1/2: connectors: xlr / trs combo jacks (xlr: pin 2 hot / trs: tip hot) input gain (pad off): -8 to 55ficha tecnica recording media: sd card: 16mb to 2gb, sdhc card: 4gb to 32gb display: backlit lcd (128 x 64 pixels) inputs inputs l/r [xyh-5 x/y mic]: mic type: unidirectional sensitivity: -45 db, 1 khz at 1 pa input gain: -8 to 52 db max sound pressure input: 140 db spl mic/line in: connector: 1/8" stereo mini jack input gain: - 8 to 52 db input impedance: 2 k o or more plug-in power: 21khz bit rate: kbps multitrack mode: wav (bwf-compliant) sampling frequency: khz bit rate: (mono/stereo) maximum simultaneous recording tracks: 6 (l/r + input 1/2 + l/r backup) usb mass storage class operation: class: usb 28 k o or more max input level: +22 dbu (pad on) phantom power: +12v /+24v /+48v equivalent input noise (ein): -120 dbu or less outputs line out: connector: 1/8" stereo mini jack rated output level: -10 dbm output load impedance: 10k o or more phone out: connector: 1/8" stereo mini jack output level: 20 w +20 w into 32 o load built-in speaker: 400mw 8 o mono recording formats stereo mode: wav (bwf-compliant) sampling frequency: khz bit rate: (stereo) maximum simultaneous recording tracks: 2 mp3 sampling frequency: 440 high speed sampling frequency: khz bit rate: bit inputs / outputs: 4 / 2 audio interface operation: stereo mode: class: usb 20 full speed sampling frequency: khz bit rate: 16 bit inputs / outputs: 2 / 2 usb bus powered operation possible (ipad operation supported in stereo mode only) power requirements aa size (lr6) battery x 2 ac adapter: ad-17 (dc5v/1a/usb-type) (optional) usb bus power0 high speed audio interface operation: multitrack mode: class: usb 2
$ 790000
-
01% thd typical at 1khz hum and noise: >90 below clipping input impedance: 47k ohms in parallel with either 100pf or 200pf 40mvrms@1khz maximum input level 45db @ 1khz maximum gain rca input/output connectors +6dbu (1art djpre ii phono preamp features: bajo nivel de ruido funciona con cualqueir tipo de tornamesas input cap filtro de bajos controlable con switch limitador de ganancia señal de clipping con luz indicadora (saturacion de señal) requiere adaptador de corriente viene incluido garantía: 30 diasart djpre ii phono preamp features: bajo nivel de ruido funciona con cualqueir tipo de tornamesas input cap filtro de bajos controlable con switch limitador de ganancia señal de clipping con luz indicadora (saturacion de señal) requiere adaptador de corriente viene incluido garantía: 30 diaspreamplificador para tornamesas marca art mod dj pre ii los tornamesas requieren ser preamplificados para lograr un buen sonido, si no se utiliza el preamp, los discos de vinilo sonaran perdidos, es un elemento indispensable cuando se trabaja con tornamesas5db frequency responseuno de los mejores preamplificadores para tu tornamesas, un sonido impecable, excelente respaldo de marca, tiene indicador de clipping, filtro de bajos, impedancia variable (100 o 200 pf) vista posterior art djpre ii phono preamp specifications: 10hz -50khz, +/preamplificador para tornamesas marca art mod dj pre ii los tornamesas requieren ser preamplificados para lograr un buen sonido, si no se utiliza el preamp, los discos de vinilo sonaran perdidos, es un elemento indispensable cuando se trabaja con tornamesas4vrms) maximum output level switchable low cut filter -3db @ 22hz 7-12v dc or 9-12v ac @ 150ma power requirement 4-1/5"w x 1-3/4"h x 3-1/2"d 1-1/4 lbs
$ 176000
-
01% thd typical at 1khz hum and noise: >90 below clipping input impedance: 47k ohms in parallel with either 100pf or 200pf 40mvrms@1khz maximum input level 45db @ 1khz maximum gain rca input/output connectors +6dbu (1art djpre ii phono preamp features: bajo nivel de ruido funciona con cualqueir tipo de tornamesas input cap filtro de bajos controlable con switch limitador de ganancia señal de clipping con luz indicadora (saturacion de señal) requiere adaptador de corriente viene incluidoart djpre ii phono preamp features: bajo nivel de ruido funciona con cualqueir tipo de tornamesas input cap filtro de bajos controlable con switch limitador de ganancia señal de clipping con luz indicadora (saturacion de señal) requiere adaptador de corriente viene incluidopreamplificador para tornamesas marca art mod dj pre ii los tornamesas requieren ser preamplificados para lograr un buen sonido, si no se utiliza el preamp, los discos de vinilo sonaran perdidos, es un elemento indispensable cuando se trabaja con tornamesas5db frequency responseuno de los mejores preamplificadores para tu tornamesas, un sonido impecable, excelente respaldo de marca, tiene indicador de clipping, filtro de bajos, impedancia variable (100 o 200 pf) vista posterior art djpre ii phono preamp specifications: 10hz -50khz, +/preamplificador para tornamesas marca art mod dj pre ii los tornamesas requieren ser preamplificados para lograr un buen sonido, si no se utiliza el preamp, los discos de vinilo sonaran perdidos, es un elemento indispensable cuando se trabaja con tornamesas4vrms) maximum output level switchable low cut filter -3db @ 22hz 7-12v dc or 9-12v ac @ 150ma power requirement 4-1/5"w x 1-3/4"h x 3-1/2"d 1-1/4 lbs
$ 168900
-
) input impedance 75o) input impedance 75otuaccesorio envíos de 15 a 25 días hábiles digital satellite finder can let you easy to find the satellite1) buzzer sound sync with signal 2) buzzer, backlight, attenuation by digital control 3) item parameter item parameter 4) input frequency mhz operating voltage v dc 5) input power -40dbm~ -10dbm 6) operating tempthe power can be provided by the satellite receiverinclude compass, digital lcd display show the power receivedtuaccesorio envíos de 15 a 25 días hábiles digital satellite finder can let you easy to find the satellite
$ 83100
-
5 input impedance(o) 50 polarization vertical maximum input power(w) 100 lightning protection dc ground input connector type so239 (m-female) mechanical specifications antenna dimensions (mm) f antenna weight(kg) 1 operating temperature(°c) - rated wind velocity(m/s) 60 radome color white mounting way pole-holding mounting hardware(mm) ¿5 input impedance(o) 50 polarization vertical maximum input power(w) 100 lightning protection dc ground input connector type so239 (m-female) mechanical specifications antenna dimensions (mm) f antenna weight(kg) 1 operating temperature(°c) - rated wind velocity(m/s) 60 radome color white mounting way pole-holding mounting hardware(mm) ¿electrical specifications frequency range(mhz) bandwidth(mhz) 5 / 10 gain(dbi) vswr =1electrical specifications frequency range(mhz) bandwidth(mhz) 5 / 10 gain(dbi) vswr =1
$ 320000
-
1% input sensitivity 077v maximum input level 21dbv/9v damping factor (f=1khz 8o) >350 input impedance 20k o fuse 5mm x 20mm ac 115v/230v hz output stereo 8 oohm 2 x 150w rms output stereo 4 oohm 2 x 200w rms output bridged 8 oohm 400w rms dimensions (wxdxh) 19” x 135db signal to noise (lf / hf) >90db thd (lf / hf) > 0amplificador de w 400rms a 8ohm frequency response 10hz ~ 50khz ±1los demas solo por effecty6 kg) no acpeto cambios, solo venta direcat y rapidaenvio gratis por servientregaacepto mercado pago siempre y cuando tenga mas de 20 puntos de calificacion el compradoresta con poco uso, el precio es solo por el amplificador como lo ven esta en su rack, bien conservado y con uso muy, ocasional en la casa8” x mm x 350mm x 88mm) net weight 19 lbs (8
$ 460000
-
5hz – 150hz system power rating w peak, 500w continuous input impedance 22k (balanced) line input gain 0 to 36 dbu line +14dbu connectors 2 x balanced xlr-1/4” combination inputs; 2 x male xlr loop thru out led indicators front power led (defeatable, white) rear power led (white), bluetooth (blue), eq+ (green) preset (green) signal (green) limit (orange) cooling passive ac power input vac hz; vac hz ac power consumption (120v~) 1/8th power – 1una carcasa ligera y muy útil permite que el bajo sea fácilmente transportado y configurado donde sea necesario un refuerzo de baja frecuenciael eon618s es un bajo activo de la serie eon600 de jbl professional5 kg) shipping weight 91 lbs (412 kg) shipping dimensions (l x w x h) 803mm x 768mm x 631mm (3171a (max), 1/3rd power – 25hz – 150hz control bluetooth • 3 eq paramétricos + estante hi & lo • ganancia y retardo • configuraciones de guardar y recuperar • inversión de polaridad jbl engineered crossover presets • 80 hz • 100 hz • 120 hz • eon m20 pole cup gabinete duraflex robusto y preparado para escenarios ------------------------------------------------------------------------ system type self powered 18” subwoofer maximum spl output 134 db frequency range (-10 db) 31hz –150hz frequency response (-3 db) 424”) weight 72 lbs (351")el eon618s es un bajo activo de la serie eon600 de jbl professional03a (max) lf driver 1 x jbl 618h 457mm (18”) woofer with 2” voice coil crossover frequency selectable; 80 hz, 100 hz, or 120 hz material duraflex coated wooden enclosure suspension/mounting m20 threaded pole cup handles 2 grille powder coated, obsidian, perforated steel with acoustically transparent black cloth backing dimensions (l x w x h) 582mm x 668mm x 645mm (2214a (max), 1/4th power – 1ha sido diseñado para ofrecer un rendimiento líder en una variedad de aplicaciones compatibles con eon600 y otros sistemas de gama completatransductores jbl premium amplificación clase d de alta eficiencia de w salida spl máxima: 134db tipo de sistema: subwoofer de 18 “ rango de frecuencia (-10db): 31hz – 150hz respuesta de frecuencia (- 3db): 42
$ 2500000
-
62 lb lamp input power: 12 vdc62 lb lamp input power: 12 vdcthis little swr/wattmeter has a huge 3" cross-needle meterspecifications: frequency range: mhz input impedance: 50 ohms power range: 15 and 150 watts forward power / 5 and 50 watts reflected power power accuracy: 10% at full scale minimum input power: 1 watts connectors: uhf (m type) dimensions: 3two selectable power ranges, built-in meter light with 12 vdc or 110 vac with optional adapterperfect for mobile or portable operationread forward/reflected power and swr simulaneouslythis little swr/wattmeter has a huge 3" cross-needle meter
$ 490000
-
3khz total power:30 watts hf power:10 watts lf power:20 watts peak spl:100 watts auto-standby:30 minutes cabinet material:mdf input connectors: unbalanced 7kî© rca balanced 10kî© â¼" trs and xlrpin 2 & tip = hot\positive, pin 3 & ring = cold\negative pin 1 & sleeve = ground controls: hf level adjust (-2db, -1db, 0, +1db) lf level adjust (-2db, -1db, 0, +2db) system volume (-30db to +6db) magnetic shielding:yes dimensions (h x w x d):mm) x mm) x mm) product net weight:8) fuse rating:slow blow type, 5mm x 20mm por lo general llega en 1 o 2 dias habiles pero puede tardar hasta 5 dias habiles dependiendo del lugar de despacho y la disponibilidad en bodegasconexiones de entrada múltiples aseguran la g3 rokit 4 integrará fácilmente en cualquier configuración del sistemael puerto de graves de emisión frontal reduce el acoplamiento límite para permitir una colocación flexible en la sala mientras que la superficie de ingeniería reduce la distorsión de difracciónel rokit 4 es la solución más compacta de la serie rokit krkel sistema consiste en un "tweeter de cúpula suave y 4" 1 woofer compuesto de vidrio-aramidael beneficio y la solución para los pequeños escritorios que requieren un gran sonidoproporciona altas frecuencias de hasta 35 khz, la claridad vocal y mejor respuesta de bajosla guía de ondas rokit está diseñado para asegurar imágenes detalladas en la posición de escuchaakita music distribuidor autorizado de krk y mercadolider ofrece para ustedes para entrega o despacho inmediato: monitores de estudio krk rokit 4 3g (par) entrega inmedia vienen las dos unidades en el paquete en akita music manejamos facturacion legal con iva y garantia directa / envios a nivel nacionallos propietarios, la clase a / b subvenciones amplificador biamplificados spl de hasta 100 dbconfiguration:2-way system type:active studio monitor mf/hf cone material:aramid glass composite woofer lf transducer:4" aramid glass composite woofer frequency range (-10db):51hz - 35khz crossover frequency:2krk's rokit 4 g3 (generación 3) con la tecnología de monitores de estudio ofrece un rendimiento profesional y la precisión para la grabación, mezcla, masterización y reproducciónen akita music manejamos facturacion legal con iva y garantia directa / envios a nivel nacional
$ 1166000
-
005% input level / input impedance phono: -52 dbu / 47 kohms line: -12 dbu / 47 kohms mic: -52 dbu / 8descripción en la caja pioneer dj djm-450 - 2-channel dj mixer with fx license key for rekordbox dj and rekordbox dvs ac adapter power cord usb cable especificaciones input connectors channel 1 line: 2 x rca phono: 2 x rca channel 2 line: 2 x rca phono: 2 x rca aux line: 2 x rca mic: 1/4" / 65 kohms aux: -12 dbu / 47 kohms output level standard output level master 1: +6 dbu master 2: +2 dbu phones: +8 dbu rated output level master 1: +25 dbu master 2: +21 dbu load impedance master 1: 10 kohms master 2: 10 kohms phones: 32 ohms output impedance master 1: 150 ohms or lower master 2: 220 ohms or lower phones: 1 ohm or lower crosstalk line: 90 db eq controls channel isolators hi: -26 to +6 db (20 khz) mid: -26 to +6 db (1 khz) low: -26 to +6 db (20 hz) microphone eq hi: 0 to -12 db (10 khz) low: 0 to -12 db (100 hz) power 100 to 240 vac, 50 / 60 hz rated current: 600 ma rated output: 12 vdc, 2 a power consumption (standby): 05 w power consumption: 12 vdc, 1700 ma operating temperature 41 to 95°f / 5 to 35°c operating humidity 5 to 85% (non-condensation) dimensions (w × h × d) 9**** producto importado **** **** tiempo de entrega —> 8 a 12 días hábiles ****::::: bienvenidos a nuestra tienda on line left importaciones::::: somos left importaciones mercadolíderes, desde 2016 asesorando e importando bajo pedido productos de distintas categorías35 mm ts turntable ground lug output connectors master 1: 2 x xlr (l, r) master 2: 2 x rca (l, r) headphone output 1 x 1/4" / 6la satisfacción de nuestros clientes se refleja en nuestra reputación5 mm trs stereo usb type: b sample rate 48 khz bit depth 24-bit frequency response line: 20 hz to 20 khz signal to noise ratio phono: 80 db line: 94 db mic: 77 db aux: 96 db thd line - master 1: 0·[proceso de compra:]··[left importaciones]··´¯) - resuelve todas tus dudas leyendo la publicación detalladamente ó haciendo las preguntas de detalles no explicados en descripción y fotosnos contactas para acordar el pago o pagas por para poder ponernos en contacto - pagas por el medio de pago indicado - se inicia la orden con nuestro distribuidor en bogotá - recibes entre 2 y 4 días hábiles y calificas tu compra**** gracias por su visita! esperamos su compra **** (¯`·35 mm trs stereo 1 x 1/8" / 3
Colombia
$ 2991000
-
Key features and benefits: high output spl and sensitivity 1 x 12” high power transducer 1 x 2” diaphragm compression driver 90º x 90º controlled coverage pattern heavy duty protective grill injection molded 2 x nl4 connector cabinet design for foh and monitor use suitable for use as a main system with or without sub speaker augmentation portable system (stand), or permanent installation (wall, ceiling) arrays with all active high power n series sub speakers for extended low frequency, high quality music reproduction monitor kit - optional cabinet dimension: specifications construction plastic transducers 1 x 2” hf + 1 x 12” lf frequency response (-3db) 50hz-18khz rated power 300w (rms) maximum spl (1w @ 1m) 97db input impedance 128db (peak) rated impedance 8o dispersion (h x v) 90° x 90° connector 2 x nl4 dimensions (w x d x h) 415mm (161lb) installation drawing12” two way full range plastic speaker product description: portable and installed plastic loudspeakers used in applications including sound reinforcement in front of house and foldback applications in houses of worship, events, clubs, rehearsal halls etc7lb) gross weight (1 piece/pack) 20kg (443”) x 382mm (15”) x 620mm (24se entregan ensayadas marca: beta3 n12 descripción: el altavoz n12está diseñado y desarrollado para ser utilizado en amplificación profesional ya sea en interiores o al aire libre y ofrece un alto rendimiento con una respuesta en frecuencia excelentethe n series delivers extraordinary performance at unmatched value1lb) installation drawing:3 meses de usoentrada: xlr línea/micrófono, 1 salida xlr acabado en fibra garantía: 12 mes(es) el altavoz n12 está diseñado y desarrollado para ser utilizado en aplicaciones de refuerzo sonoro profesional ya sea en interiores o al aire libre y ofrece un alto rendimiento con una respuesta en frecuencia excelentegarantía total, no reparación8”) net weight (1 piece/pack) 18kg (394”) packaging dimensions (1 piece/pack) 465mm (18
$ 2300000
-
0db (with 10kohm load) * display: 2 digit 7 segment led * input: 1/4" phone jack (rated input level: -20dbm, input impedance: 470kohm) * output(line / headphones combined): 1/4" stereo phone jack(maximum output level: [line]+3dbm, output load impedance 10kohm or higher / [headphones]20mw + 20mw, into 32 ohms load) * control input (solo g1): expression pedal, foot switch * power requirements: aa size(lr6) battery x 4(optional), or ac adaptor dc9v/300ma / centro negativo (optional, ad- recommended) * dimensions: 155(d) x 136(w) x 52(h) mmtipos de efectos: 54 * efectos de modulacion: 8 * patch memory: 40 (patch modificalbes) + 40 (no modificables de frabrica), total 80 * sampling frequency: 96khz * a/d conversion: 24-bit, 128 times over-sampling * d/a conversion: 24-bit, 128 times over-sampling * signal processing: 32bit * frequency response: 20hz-40khz +1pedalera zoom g1x, perfecto estado, poco uso, en su caja original
$ 119000
-
0db (with 10kohm load) * display: 2 digit 7 segment led * input: 1/4" phone jack (rated input level: -20dbm, input impedance: 470kohm) * output(line / headphones combined): 1/4" stereo phone jack(maximum output level: [line]+3dbm, output load impedance 10kohm or higher / [headphones]20mw + 20mw, into 32 ohms load) * control input (solo g1): expression pedal, foot switch * power requirements: aa size(lr6) battery x 4(optional), or ac adaptor dc9v/300ma / centro negativo (optional, ad- recommended) * battery life: 12 hours(con pilas alcalinas) * dimensions: 155(d) x 136(w) x 52(h) mm * weight: 350g (sin pilas)pedal zoom g1 en pérfecto estado sin el adaptador pero funciona con 4 pilas aa poco uso se entrega en caja especificaciones: * tipos de efectos: 54 * efectos de modulacion: 8 * patch memory: 40 (patch modificalbes) + 40 (no modificables de frabrica), total 80 * sampling frequency: 96khz * a/d conversion: 24-bit, 128 times over-sampling * d/a conversion: 24-bit, 128 times over-sampling * signal processing: 32bit * frequency response: 20hz-40khz +1
$ 80000
-
5 gain dbi: 12(max) max input power: 60 w input impedance: 50 polarization type vertical cable rg174 storage temperature -45 to +75 operating temperature -45 to+75 antenna length: 41cm cable length: 3m connector: sma plug,male pin5 gain dbi: 12(max) max input power: 60 w input impedance: 50 polarization type vertical cable rg174 storage temperature -45 to +75 operating temperature -45 to+75 antenna length: 41cm cable length: 3m connector: sma plug,male pin antena de señal de telefono celular 3g 4g gsm wcdma lte product description this 3g mobile broadband antenna is great for improving signal and transfer speeds on laptops or in vehicles antena de señal de telefono celular 3g 4g gsm wcdma lte product description this 3g mobile broadband antenna is great for improving signal and transfer speeds on laptops or in vehicles boost your 3g mobile broadband signal by 5dbi with this magnetic 3g signal booster antenna for broadband dongles with crc9/ts9/sma/ssmb/ms147/mc-card connection and other connectors available by requestspecifications: frequency range: mhz vswr 1the mini magnetic base and whip make this antenna easy to install and removethis antenna and connector assembly is all you need to make huge improvements in signal with your 3g dongle
$ 45000
-
0db (with 10k? load) display: 2-digit, 7-segment led input: 1/4" phone jack (rated input level: -20dbm, input impedance: 470k?) output (line / headphones combined): 1/4" stereo phone jack (maximum output level: {line} +3dbm, output load impedance 10k? or higher / {headphones} 20mw + 20mw, into 32? load) power requirements (not included): aa size (lr6) battery x 4, or ac adaptor dc9v/300ma / center minus type (ad- recommended) battery life: 12 hours (with alkaline batteries) dimensions (mm): 155(d) x 234(w) x 52(h) weight (without batteries): 600g*sin cable de alimentación* 8 effect modules and 54 effect types 80 patches (40 user defined and 40 preset patches) including 9 types of presets that replicate legendary rock sounds and 21 types of new artist patches 15 types of authentic drive tones advanced zfx-3 processing engine 96khz sampling 24-bit a/d/a conversion 32-bit signal processing frequency response: 20hz - 40khz 1/4-inch input jack 1/4-inch stereo output jack built-in expression pedal, drum machine, harmonized pitch shifter and chromatic tuner runs on four aa batteries (sold separately, ad-d ac adapter (included) or usb bus power specifications effect types: 54 effect modules: 8 patch memory: user 40 + preset 40, for a total of 80 sampling frequency: 96khz a/d conversion: 24-bit, 128 times over-sampling d/a conversion: 24-bit, 128 times over-sampling signal processing: 32-bit frequency response: 20hz-40khz +1
$ 120000